Tubes||Genalex PX300Bx2 (Output) | |
---|---|
Dimensions | |
Amplifier | 286mm x 368mmx210mm |
Power Supply | 150mmx345mmx210mm |
Weight | |
Amplifier | 19Kg |
Power Supply | 10Kg |
Headphone Output | |
TH+D | 1% (1KHz) |
Sensitivity | 200mV ~ 650mW |
S/N Ratio | 100dB (A - Weighted) |
Speaker Output | |
Rated Output | 8W+8W |
TH+D | 1% (1KHz) |
S/N Ratio | 95dB (A - Weighted) |
Input Sensitivity | 400mV |
The Pursuit of Direct Heated Triode (DHT) DHT refers to triode tubes that use the cathode as the filament and will heat up the cathode directly.
Minimal approach offers stellar dynamic, transient and transparent, extremely well-received by audiophiles.
A challenge for headphone applications. Low tolerance to shock and vibration, sensitive to hum/interference.
The 300B is the most renowned and sought-after DHT because of its dreamy tonal characteristic.
HA-300MK2 uses a matched pair of Gold Lion Genelex PX300B low-noise audio triode as power output tubes.
• Endure and passed the toughest tests for reliability
• Natural, the sensible and realistic sound signature
• Impressive frequency extension
Single-ended Triode (SET) Amplifier uses a single triode vacuum tube to produce amplified output without splitting the musical signal into parts.
2-stage amplification, a pair of driver tube amplifies signal voltage so that the 300B output tube will perform its amplification at a very linear condition.
Simplicity circuit design. Displace the beautiful tone of your vacuum tubes without any cancellation.
HA-300MK2 uses 4 x NOS 22DE4 from RCA, one of the best versions of 22DE4 available in the tube market Convert incoming power source to DC current, providing cleanest power with minimum interference for the amplification circuit.
• Unlike output tubes, rectifier tubes don’t involve a heavy lifting load, they can last very long without deteriorating.
• No matching requirement, replace on per piece based.
Cayin developed many 300 B-based SET amplifiers and 6SN7 is always the first choice for driver tube.
HA-300MK2 uses a matched pair of Tung-Sol 6SN7GTB to complete the two-stages SET amplification.
• Low noise, high price-performance and highly reliable
• Superlinear and natural sounding
• A classical tube combination adopted in many Cayin SET amplifier implementations
Outboard Power Supply minimize ripple effect and offer a clean, low-noise power to the amplification circuit.
Multi-stage tube regulated power supply circuit, feed power to different amplification stages independently.
The outboard power supply is driven by a high inductance high efficiency toroidal power transformer.
Cayin design and wind the Power transformers in-house.
Low leaking design for headphone applications.
Driver Tubes: Tung-Sol 6SN7GTB (Matched Pair)
Output Tubes:Genalex PX300B (Matched Pair)
Rectifier: NOS RCA 22DE4 x 4
The 300B SET output drives a pair of proprietary output transformers and supports both headphones and speakers.
The secondary winding of the output transformers provides an alternative phase and composes a balanced output, enabling balanced driven from a SET amplification circuit.
Single-ended and balanced headphone outputs are "original" outputs from the transformers.
Optimized its output to handle the headphone loading according to three headphone impedance settings Low (L): 8Ω~64Ω; Medium (M): 65Ω-250Ω; High (H): 251Ω~600Ω.
Matching headphone impedance should produce a natural sound with well-defined bass reproduction, it is different from gain control of a solid state amplifier.
Planar Headphones are more sensitive to impedance matching than dynamic headphones but users can try out different impedance settings.
With a pair of EI Transformers, HA-300MK2 delivers a natural and realistic sound across the frequency range.
Cayin designs and winds the all transformers in-house because they play a vital role in our amplifiers.
• Total freedom in specifying the requirements and winding instructions.
• Total control on material and craftsmanship.
HA-300MK2 offers three headphone outputs: 6.3mm single-ended, 4.4mm balanced, and 4-pin XLR balanced.
The XLR4 output is a full-fetched output but the 4.4mm output is optimized for a wider range of headphones, including high-sensitivity portable headphones.
• 4.4mm is level-matched, lower noise, lower power output with the same audio performance
• at LOW headphone impedance, the 4.4mm output delivers roughly 70% of 4-pin XLR output only.
Combinations all audiophiles will cherish and admire: purity of single-ended triode amplifier, the dreamy sound signature of 300B, and authoritative dynamic and control when called for.
With up to 6w per channel, provides all the power you need to handle a vast selection of headphones, from portable friendly dynamics to extremely demanding planar.
Low noise low distortion electronic controlled resistor ladder analogue volume controller JRC MUSE72320V, commonly used in high-end preamplifiers and streamers.
4-channel in one integrated controller offers high precision and zero channel imbalance.
ALPS balanced potentiometer as a 41-steps encoder to provide precise and intiuative control that we are all familiar with.
13.5mm brushed Aluminum-Magnesium Alloy front panel, added strength and corrosion resistance to the amplifier.
The panel is black anodized, it is extremely durable and protect the amplifier from scratches
The chassis and transformer pots are treated by our proprietary 14 rounds of crafting process composed of scratch, spray, sanding and baking.
The high gross final finishing endows a refined and delicate texture as well as protects the amplifier from years of long service.
60sec startup delay circuit.
Enhances circuit protection and minimizes pop noise during startup.
Specially designed vacuum tube shielding cage to protect users from touching the red hot vacuum tubes during operation.
Removing and installing with ease, safe and flexible for different needs.
Lock-on & quick-release aviation-grade copper connectors.
Silver plated Teflon umbilical cable connects between outboard power supply and amplifier circuit.
Balanced (XLR) and Single-ended (RCA) to cover a variety of inputs.
Balanced input will go through a pair of input transformers, the + and – half cycle will merge to become a single-ended signal.
Users can toggle between speaker and headphone output.
With 8W per channel Class A output, the amplifier can drive high sensitive speakers or common bookshelf speakers in a small listening area.
High quality solid brass speaker terminals.
Custom-made silica gel shock absorbers between critical tube components, chassis mainframe and tube socket, remove microphonic effectively.
Reinforcing shielding of transformers and effective circuit layout to minimize interference.
As a company our primary goal is to provide a seamless service that results in customer satisfaction. We aim to deliver within 3 working days. Unfortunately, there may be occasions where this time frame may not be met due to unforeseen circumstances; in this instance, we deliver product/s as soon as we can. All delivery charges are included within the prices quoted, unless otherwise specified.
All small items are usually delivered between 9am and 6pm, on a Monday to Friday, unless a Saturday delivery is requested. Follow My Parcel is an industry-changing innovation from DPD Local, which will give your customers unparalleled levels of information and peace of mind.Not only will your customers receive a one hour delivery timeslot, but they’ll now also be able to track the progress of their parcels on a map as our drivers make their way to the delivery addresses. Follow My Parcel will: