0121 382 5444 0

The sound of Rupert Neve comes to your vinyl collection.

The Fidelice Precision Phono Pre-Amplifier is a singular achievement in analogue sound reproduction. Based around the classic amplifier topologies that have made Rupert Neve’s microphone preamplifiers the consistently obvious choice for the world’s recording engineers since the early 1970s, the Precision Phono Pre-Amplifier’s MM and MC gain stages have each been painstakingly tailored for an enthralling listening experience with unparalleled accuracy, depth and expressiveness.

Purpose-designed, low-noise discrete Class-A amplifiers are implemented throughout the signal path for both MM and MC cartridges. The passive RIAA filter utilizes exceptional low-tolerance componentry, the selectable capacitance for the MM input, and a selectable 18dB / octave Rumble Filter with a corner frequency at 11.4Hz.


Regardless of whether you are listening to pristine classical recordings or the heaviest rock, getting the most out of your turntable system can be a challenge. The Precision Phono Pre-Amplifier is designed to coax out every detail from your pressings and turntable and provide your amplifiers with a complete and unadulterated signal, so you get the most from your vinyl collection.

Both the moving magnet and moving coil gain settings have been optimized to enhance the performance of the cartridge. These Phono stages use carefully-implemented discrete Class-A designs that utilize the highest performance JFETs and BJTs, honed over countless hours of listening and comparison.


The resulting sound quality is technically - and musically - exceptional. The RIAA curve is matched to better than 0.15dB, and frequency response from 20Hz to 20kHz is better than +/-0.1dB. Even at 10Hz and 120kHz, there is less than a single decibel of deviation. Dynamic range is a powerful 101.58dB (MM path), an EIN is an exceptionally low -129dBV (MC path).

Beyond its technical feats, however, it is the immersive listening experience that sets the Precision Phono Pre-Amplifier apart. The soundstage brings out a stunning three-dimensionality from recordings with a combination of a rich low end, pristine clarity throughout the crucial midrange, and a delicately sweet high-end. These are hallmarks of Rupert Neve’s vintage and modern recording equipment and are exemplified in the Precision Series.


While the Fidelice Precision Phono Pre-Amplifier has an intentionally minimal feature set, there are several options that can adapt the phono stage to your system.

The left-hand switch inserts an 18dB / octave Rumble Filter with a corner frequency at 11.4Hz to remove extremely low-frequency artefacts from the signal, saving your amplifiers and speakers from exerting extra energy in replicating unnecessary sounds below that frequency.

Both moving magnet (MM) and moving coil (MC) signal paths are included such that the Precision Phono Pre-Amplifier can be used with virtually any cartridge. The MM setting provides an input impedance of 47kOhms, selectable capacitance at 110pF or 220pF to serve a variety of MM cartridges, and 40dB of gain. The MC setting provides an input impedance of 100 Ohms, the capacitance of 220pF, and gain of 60dB.