PLANAR MAGNETIC OPEN BACK OVER-EAR HEADPHONES

HIGH-FIDELITY HEADPHONES FOR PROFESSIONALS AND AUDIOPHILES

Every aspect of Kennerton Wodan, the newest planar-magnetic headphone, is designed to achieve maximum performance in the speed of music performance. A dynamic and fast reproduction will allow you to perceive every single environmental sound effect as if you were present in the place where the sounds were born.

Kennerton has gone an extra mile while designing and creating Wodan. Every cup of this model is made of a whole piece of wood. It does not only affect sounding in a positive way but also adds a special feeling from the amount of attention to the details that the crafters put in every single unit.

To create such a special headphone cup, we first use machine carving to create a workpiece from a wooden plank. Then the workpiece goes into polish, and peculiarity of this model is that every transition, every cell and every hollow is polished by hand. Afterwards, the polished cup soaks in Italian oils used in the restoration of antique furniture and best picture frames. The grids’ cells created in a specific way to form a bell like in design of a horn.

SO WE STARTED MAKING OUR OWN DRIVER FROM SCRATCH.

Our drivers are solely designed and produced in Russia, which involves a facility that also works for the aerospace and military industries, which ensures the highest quality and durability of our headphones.

• A new 80mm planar-magnetic driver, with every aspect of this technology being implemented, such as phase coherence, flat impedance and a low-mass diaphragm.

• Multi-layer 10µm polyimide film diaphragm, tested to have the highest reliability and longevity in the most extreme environmental conditions.

• FEM-Optimized Magnet System with 10 neodymium magnets arranged in symmetric push-pull configuration.

• Unique semicircular bar magnets.

• A semicircular form, therefore, has many advantages over the ordinary rectangular shaped bar magnets: It gives a more uniform magnetic field, greatly reduces internal resonances and produces an optimal sound.

• Our driver allows greater sensitivity, thanks to its powerful magnets and low-mass diaphragm. It can therefore be easily driven by portable devices.

THE MANUFACTURING PROCESS OF STANDARD WOODEN CUPS

1. All wood types used for making the headphones’ assembly and cups always undergo multiple different processes. We use drying and coating methods which have antibacterial substances making the cups pleasant to look at and resistant against environmental factors.

2. Our wooden cups are made by a specific in-house developed procedure. The wood types and geometry of the acoustic design influences the sound and we, therefore, take this into account when producing and designing our cups.

3. Cups are manufactured by a 3D model on a computer-controlled by a precision machine; the machines have extreme processing quality and geometric shape repeatability.

4. After the milling operation, the cups are sanded and polished by hand.

5. After sanding, wood is coated by using special oils to protect it from humidity and prevent it from deteriorating.

6. After that, the workpieces are processed with microwaves for several minutes in order for the oils on the cups to avoid deterioration.

7. After that, the cups are covered by hot bee-wax and dried in a special drying chamber for about 1.5 hours. Temperatures may reach 74 degrees centigrade (where it varies from 60 to 74 degrees centigrade depending on the type of wood).

8. Drying is followed by the cups being cooled at room temperature for at least 6 hours. The workpiece is ground for the second time, hot wax is again applied; which is again followed by drying the cups at the same temperature 74 degrees, for about 8 hours.

9. The closing stage of the work includes thorough polishing of the cup, laser engraving of the logo and other elements as per the design. In some cases, patina forming treatment is applied for a decorative finish that makes the surface look perfect. Note: Each pair of headphones is one of a kind, and due to the nature of handwork, slight variations in wood grain may occur.