Input Connector||XLR x2, RCA x 2 | |
---|---|
Tube | |
Output | JJ 6V6S x2 |
Driver | JJ 12AU7/ECC82 x2 |
Rectifier | RCA 22DE4 x1 |
Dimension | 306mm x 260mm x 170mm |
Net Weight | 12kg |
Output Tube Fuse | T1 25mAE250V |
Power Consumption | 80W |
Frequency Range | 18 Hz- 30kHz ±3dB |
Headphone Impedance | L|| 8-64 0; M|| 65-2500; H|| 251-6000 |
Headphone Connector | 4pin XLR x1, 4.4mm x1, 6.35mm x1 |
S/N Ratio | 100dB (A-Weighted) |
When exquisite design accomplished by first class engineering, when aesthetic backed up by rigorous production.
The HA-3A vacuum tube headphone amplifier let you enjoy your beloved music through your choice of headphones or earphones in a dedicated, engaging, and indulging retreat. HA-3A might look compact and simple, but Cayin has devoted our renowned engineering, decades of audio equipment manufacturing and carefully selected performance-based components to make this happen.
Driver Tubes
Dual 12AU7/ECC82(Matched Pair) from JJ*
Output Tubes
Dual 6V6S (Matched Pair) from JJ*
HA-3A uses an RCA 22DE4 as a rectifier tube, one of the best versions of 22DE4 available in the tube market.
While converting the incoming power source to DC current the 22DE4 rectifier tube minimises interference and provides clean power to the amplification circuit.
The chassis and transformer pots are treated by our proprietary 14 rounds of crafting process composed of scratch, spray, sanding and baking.
The high gloss final finishing endows a refined and delicate texture as well as protects the amplifier during years of long service.
Our engineers have optimized HA-3A’s output to handle the headphone loading according to three headphone impedance settings:
Low: 8Ω ~ 64Ω
Medium: 65Ω ~ 250Ω
High: 251Ω ~ 600Ω
A set of three 39x18mm XL shock-absorbing aluminium foot pads to provide firm and stable amplifier placement on any hard flat surface.
2-rear & 1-front self-levelled placement to handle the extra weight on the back of the amplifier due to the power and output transformers.
The HA-3A vacuum tube amplification is designed as a 2-stage single-ended circuit.
The 12AU7/ECC82 driver tubes will amplify the voltage level of the incoming audio signal so that the 6V6S output tubes will perform their amplification at a very linear condition.
Single-ended circuit design displaces the beautiful tone of your vacuum tubes without any cancellation.
Single-ended uses matched pairs instead of matched quad-set tubes, you can enjoy greater flexibility when you perform tube rolling.
6.35mm Single-ended
4.4mm Balanced
4-Pin XLR Balanced
The 4-Pin XLR output is a full-fetched output but the 4.4mm output is optimized for a wider range of headphones, including high-sensitivity portable headphones.
Special shielding and anti-shock design remove microphonic effectively.
Enhances circuit protection and minimizes pop noise during start-up.
The High-performance 50KA*2 Dual Unit smooth potentiometer from ALPS offers durable, high-precision volume control with excellent operational fee.
Specially designed vacuum tube shielding cage to protect users from touching the red hot vacuum tubes during operation.
Balanced (XLR) and Single-ended (RCA) to cover a variety of inputs. Balanced input will go through a pair of input transformers, and the + and - half cycle will merge to become a single-ended signal.
The 6V6S output drives a pair of proprietary output transformers that supports single-ended and balanced headphone outputs.
The secondary winding of the output transformer provides an alternative phase and composes a balanced output, enabling a balanced driver from a single-ended vacuum tube amplification circuit.
Both single-ended and balanced headphones are
“original” outputs from the transformers.
Cayin always designs, wind and use high inductance, high-efficiency power transformers in our products.
Reinforcing shielding design minimizes interference and noise while ensuring HA-3A to work in the best condition.
Time-consuming, shortest signal path, better attention to detail, the entire circuitry is hardwired by skilful craftsmen.
Implement circuit design with a high level of transparency and refinement, improving overall efficiency and conductivity.
As a company our primary goal is to provide a seamless service that results in customer satisfaction. We aim to deliver within 3 working days. Unfortunately, there may be occasions where this time frame may not be met due to unforeseen circumstances; in this instance, we deliver product/s as soon as we can. All delivery charges are included within the prices quoted, unless otherwise specified.
All small items are usually delivered between 9am and 6pm, on a Monday to Friday, unless a Saturday delivery is requested. Follow My Parcel is an industry-changing innovation from DPD Local, which will give your customers unparalleled levels of information and peace of mind.Not only will your customers receive a one hour delivery timeslot, but they’ll now also be able to track the progress of their parcels on a map as our drivers make their way to the delivery addresses. Follow My Parcel will: